t: 01206 794055
e: sales@officeis.co.uk

0 BASKET
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

S-range Digicounter

Category Atomic Structure
HE1008422

S-range Digicounter

Product Code: HE1008422
Category Atomic Structure

Description

A versatile Digicounter suitable for timing, frequency, period and radioactivity measurement. A built-in high stability crystal controlled oscillator ensures a typical accuracy of 0.005% on all measuring ranges. The period measurement and display function enables very low frequencies to be measured rapidly with a high degree of accuracy. It also allows triggered timing of trolley speeds (etc.) to be performed using a single light gate; and by shorting the period input, infinite radioactivity or frequency counts may be obtained.

  • Full Notes for Use included.

Radioactivity:

  • Inputs: E.H.T BNC connector for a G.M. tube. Supply voltage adjustable from 300 to 500V
  • Counting time: 1, 10, 100 or 1000 seconds and infinity. Can be set to take a single or a continuous series of readings, each being displayed for 3 seconds before the next is taken
  • Rate: Obtained by dividing the count reading by the counting time
  • Speaker: Output will feed into a speaker of any impedance
  • Timing Ranges: 0 to 99.9999 x 0.1ms; 0 to 999.999 x 1ms; 0 to 9999.99 x 0.01s (10ms); 0 to 99999.9 x 0.1s (100ms)
  • Accuracy: Better than 0.005% ±1 count
  • Gating: (1) By manual front panel stop/start switch;(2) By make or break input sockets; (3) By triggering timing stop/start inputs. Output 2V and 6V a.c. at 0.5A for light gate or similar amps

Frequency Inputs:

  1. Low frequency, d.c. to 3MHz minimum (5MHz typical). Will operate with T.T.L inputs, light gates etc.
  2. High frequency, capacitively coupled 30Hz to 3MHz minimum (5MHz typical);
  3. High gain, input voltage required 0.8mV r.m.s. from 30Hz to 20kHz; recommended microphone - high impedance dynamic type
  • Input impedance: 20O for inputs (1) and (2); 100kO for input (3)
  • Accuracy: Better than 0.005% -+ 1 count

Period:

  • Timing intervals: 0.1, 1, 10 and 100ms

This device is compliant to EN61010-2010 with certificates available on request.

Related products include:

  • Geiger-Muller Tube (B8H27155) & Geiger-Muller Tube Holder (B8A49724)
  • Radioactive Source Handling Tool (B8A49608)
  • Radioactive Sources (B849589, B8A49578, or B8A49591)
  • Light Gate (B8H27623)

Specifications

UNSPSC Code

41122411

Height

250in

Width

240in

Length

470in

Brand

Findel

Categories

Physics

Category

Atomic Structure

Compare

S-range Digicounter

Category Atomic Structure
HE1008422

S-range Digicounter

Product Code: HE1008422
Category Atomic Structure

Description

A versatile Digicounter suitable for timing, frequency, period and radioactivity measurement. A built-in high stability crystal controlled oscillator ensures a typical accuracy of 0.005% on all measuring ranges. The period measurement and display function enables very low frequencies to be measured rapidly with a high degree of accuracy. It also allows triggered timing of trolley speeds (etc.) to be performed using a single light gate; and by shorting the period input, infinite radioactivity or frequency counts may be obtained.

  • Full Notes for Use included.

Radioactivity:

  • Inputs: E.H.T BNC connector for a G.M. tube. Supply voltage adjustable from 300 to 500V
  • Counting time: 1, 10, 100 or 1000 seconds and infinity. Can be set to take a single or a continuous series of readings, each being displayed for 3 seconds before the next is taken
  • Rate: Obtained by dividing the count reading by the counting time
  • Speaker: Output will feed into a speaker of any impedance
  • Timing Ranges: 0 to 99.9999 x 0.1ms; 0 to 999.999 x 1ms; 0 to 9999.99 x 0.01s (10ms); 0 to 99999.9 x 0.1s (100ms)
  • Accuracy: Better than 0.005% ±1 count
  • Gating: (1) By manual front panel stop/start switch;(2) By make or break input sockets; (3) By triggering timing stop/start inputs. Output 2V and 6V a.c. at 0.5A for light gate or similar amps

Frequency Inputs:

  1. Low frequency, d.c. to 3MHz minimum (5MHz typical). Will operate with T.T.L inputs, light gates etc.
  2. High frequency, capacitively coupled 30Hz to 3MHz minimum (5MHz typical);
  3. High gain, input voltage required 0.8mV r.m.s. from 30Hz to 20kHz; recommended microphone - high impedance dynamic type
  • Input impedance: 20O for inputs (1) and (2); 100kO for input (3)
  • Accuracy: Better than 0.005% -+ 1 count

Period:

  • Timing intervals: 0.1, 1, 10 and 100ms

This device is compliant to EN61010-2010 with certificates available on request.

Related products include:

  • Geiger-Muller Tube (B8H27155) & Geiger-Muller Tube Holder (B8A49724)
  • Radioactive Source Handling Tool (B8A49608)
  • Radioactive Sources (B849589, B8A49578, or B8A49591)
  • Light Gate (B8H27623)

Specifications

UNSPSC Code

41122411

Height

250in

Width

240in

Length

470in

Brand

Findel

Categories

Physics

Category

Atomic Structure

Compare
SEARCH ×